Gravity slicer Model PALLADIO 300 INGR.
Availability: In stock
Gravity slicer Sirman Model PALLADIO 300 INGR.
Rounded design, no sharp edges and visibile screws with chrome plated and ground slide rod, lapped cast iron slide rod bushing, vulcanized rubber stops on carriage and removable support cover for thickness gauge plate.
Technical data
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings
- 49,5 mm distance between blade and motor
- Bottom cover
- Changeover electronic circuit 110-220-380 V single and three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 35°.
- Plastic knob
- Buttons in insulated stainless steel (IP 67) in housing
- Enclosed and sealed worm gear reduction unit. Oil bath lubrication
- Automatic version not available
- Model PALLADIO 300 INGR.
- ø Blade mm 300 - inch. 12
- Motor watt 400 - Hp 0,54
- Cutting thickness mm 23
- Run of carriage mm 310
- Plate mm 305x270
- A mm 465
- B mm 340
- C mm 615
- D mm 547
- E mm 465
- F mm 710
- G mm 545
- X mm 270
- Y mm 190
- H mm 240
- W mm 220
- Net weight kg 36
- Packaging dimensions mm 780x640x700
- Gross weight kg 45
Gravity slicer Sirman Model PALLADIO 300 INGR.
Rounded design, no sharp edges and visibile screws with chrome plated and ground slide rod, lapped cast iron slide rod bushing, vulcanized rubber stops on carriage and removable support cover for thickness gauge plate.
Technical data
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings
- 49,5 mm distance between blade and motor
- Bottom cover
- Changeover electronic circuit 110-220-380 V single and three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 35°.
- Plastic knob
- Buttons in insulated stainless steel (IP 67) in housing
- Enclosed and sealed worm gear reduction unit. Oil bath lubrication
- Automatic version not available
- Model PALLADIO 300 INGR.
- ø Blade mm 300 - inch. 12
- Motor watt 400 - Hp 0,54
- Cutting thickness mm 23
- Run of carriage mm 310
- Plate mm 305x270
- A mm 465
- B mm 340
- C mm 615
- D mm 547
- E mm 465
- F mm 710
- G mm 545
- X mm 270
- Y mm 190
- H mm 240
- W mm 220
- Net weight kg 36
- Packaging dimensions mm 780x640x700
- Gross weight kg 45
Manufacturer | Sirman |
---|---|
type | By gravity |
Blade diameter | mm 300 |
Length | 71 |
Depth | 54.7 |
Height (cm) | 54.5 |
Blade diameter | 30 |