Gravity slicer Model GALILEO 385 EVO TOP
Availability: In stock
Gravity slicer Sirman Blade Ø 385 Model GALILEO 385 EVO TOP
Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices and safety ring on table shaft to prevent liquids from seeping inside the machine.
Technical specifications
- Rounded design, no sharp edges and visibile screws
- Chrome plated and ground slide rod
- Self lubricating slide rod bushings
- Vulcanized rubber stops on carriage
- Removable support cover for thickness gauge plate
- Stainless steel slice deflector
- Blade pulley without centre hole to facilitate cleaning
- Easily removable blade cover
- Stainless steel screws and fittings
- Bottom cover
- Changeover electronic circuit 110-220-380 V single and three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 38°.
- Aluminium knob
- Aluminium telescopic feet with rubber base
- Buttons in insulated stainless steel (IP 67) in housing
- Maintenance tool kit
- ø Blade mm 385 - inch 16
- Motor watt 380 - Hp 0,52
- Cutting thickness mm 25
- Run of carriage mm 365
- Plate mm 350x320
- A mm 515
- B mm 410
- C mm 770
- D mm 605
- E mm 525
- F mm 820
- G mm 700
- L mm 730
- X mm 320
- Y mm 240
- H mm 305
- W mm 280
- Net weight kg 58
- Packaging dimensions mm 870x840x750
- Gross weight kg 74
Gravity slicer Sirman Blade Ø 385 Model GALILEO 385 EVO TOP
Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices and safety ring on table shaft to prevent liquids from seeping inside the machine.
Technical specifications
- Rounded design, no sharp edges and visibile screws
- Chrome plated and ground slide rod
- Self lubricating slide rod bushings
- Vulcanized rubber stops on carriage
- Removable support cover for thickness gauge plate
- Stainless steel slice deflector
- Blade pulley without centre hole to facilitate cleaning
- Easily removable blade cover
- Stainless steel screws and fittings
- Bottom cover
- Changeover electronic circuit 110-220-380 V single and three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 38°.
- Aluminium knob
- Aluminium telescopic feet with rubber base
- Buttons in insulated stainless steel (IP 67) in housing
- Maintenance tool kit
- ø Blade mm 385 - inch 16
- Motor watt 380 - Hp 0,52
- Cutting thickness mm 25
- Run of carriage mm 365
- Plate mm 350x320
- A mm 515
- B mm 410
- C mm 770
- D mm 605
- E mm 525
- F mm 820
- G mm 700
- L mm 730
- X mm 320
- Y mm 240
- H mm 305
- W mm 280
- Net weight kg 58
- Packaging dimensions mm 870x840x750
- Gross weight kg 74
Manufacturer | Sirman |
---|---|
type | By gravity |
Blade diameter | mm 385 |
Length | 82 |
Depth | 60.5 |
Height (cm) | 70 |
Blade diameter | 38.5 |