Gravity slicer Model GALILEO 350 EVO
Availability: In stock
Gravity slicer Sirman Model GALILEO 350 EVO
Rounded design, no sharp edges and visibile screws with chrome plated and ground slide rod and self lubricating slide rod bushings. Vulcanized rubber stops on carriage, removable support cover for thickness gauge plate and stainless steel slice deflector. Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
Technical specifications
- Blade pulley without centre hole to facilitate cleaning
- Safety ring on table shaft to prevent liquids from seeping inside the machine
- Easily removable blade cover
- Stainless steel screws and fittings
- Bottom cover
- Changeover electronic circuit 110-220V single or 220-280V three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 38°.
- Plastic knob
- Rubber feet.
- Buttons in insulated stainless steel (IP 67) in housing
- ø Blade mm 350 - inch 14
- Motor watt 380 - Hp 0,52
- Cutting thickness mm 25
- Run of carriage mm 365
- Plate mm 350x320
- A mm 515
- B mm 410
- C mm 750
- D mm 590
- E mm 535
- F mm 820
- G mm 700
- L mm 730
- X mm 320
- Y mm 210
- H mm 275
- W mm 250
- Net weight kg 56
- Packaging dimensions mm 870x840x750
- Gross weight kg 72
Gravity slicer Sirman Model GALILEO 350 EVO
Rounded design, no sharp edges and visibile screws with chrome plated and ground slide rod and self lubricating slide rod bushings. Vulcanized rubber stops on carriage, removable support cover for thickness gauge plate and stainless steel slice deflector. Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
Technical specifications
- Blade pulley without centre hole to facilitate cleaning
- Safety ring on table shaft to prevent liquids from seeping inside the machine
- Easily removable blade cover
- Stainless steel screws and fittings
- Bottom cover
- Changeover electronic circuit 110-220V single or 220-280V three phase
- Built in sharpening tool with bottom protection
- Standard blade removal tool
- Blade inclination 38°.
- Plastic knob
- Rubber feet.
- Buttons in insulated stainless steel (IP 67) in housing
- ø Blade mm 350 - inch 14
- Motor watt 380 - Hp 0,52
- Cutting thickness mm 25
- Run of carriage mm 365
- Plate mm 350x320
- A mm 515
- B mm 410
- C mm 750
- D mm 590
- E mm 535
- F mm 820
- G mm 700
- L mm 730
- X mm 320
- Y mm 210
- H mm 275
- W mm 250
- Net weight kg 56
- Packaging dimensions mm 870x840x750
- Gross weight kg 72
Manufacturer | Sirman |
---|---|
type | By gravity |
Blade diameter | mm 350 |
Length | 82 |
Depth | 59 |
Height (cm) | 70 |
Blade diameter | 35 |